Products
Markets
Technical
News
About Us
Downloads
Media
Contact
Approvals
(0) Approvals : Without
(01) Approvals : ATEX 1 1 1 G Ex ia llC T6 Ga + 1 1 1 D Ex ia lllC Da
(02) Approvals : FM IS CL 1/11/111 DIV 1 GPS A-G + CL I zone 0 Ex ia llC T6 FM X P-AIS/DIP/NI CL 1/11/111 Div 1 GPS A-G + CL I zone 1 I zone 2 Ex d[ia] I Ex nA[ia] llC T6
Wetted Material/Pressure
(01) Wetted Material/Pressure : 316L SS
(02) Wetted Material/Pressure : HASTELLOY® C
Probe Type
(01) Probe Type : Single rod o'1/4" (o'8mm) max. 4m (13.12ft)
(02) Probe Type : Single rod o'1/4" (o'8mm) segmented max.6m (19.69ft)
(03) Probe Type : Single rod o'3/8" (o'10mm) max. 4m (13.12ft)
(04) Probe Type : Single cable o'1/8" (o'4mm) max. 60m (196.85ft)
(05) Probe Type : Single cable o'1/8" (o'4mm) max. 60m (196.85ft) turnbuckle
(06) Probe Type : Single cable o'1/8" (o'4mm) max. 60m (196.85ft) chuck
(07) Probe Type : Single cable o'1/8" (o'4mm) max. 60m (196.85ft) threaded end
(08) Probe Type : Single cable o'1/8" (o'4mm) max. 60m (196.85ft) crimped end
(09) Probe Type : Single cable o'1/8" (o'4mm) max. 60m (196.85ft) open end
(10) Probe Type : Coaxial o'3/4"(o'22mm) max.6m (19.69ft)
(11) Probe Type : Coaxial o'3/4"(o'22mm) segmented max.6m (19.69ft)
(12) Probe Type : Double rod 2xo'1/4" (o'8mm) max. 4m (13.12ft)
(13) Probe Type : Double cable 2xo'1/8" (o'4mm) max. 14m(45.93ft)
(14) Probe Type : Reversed interface o'3/8" (o'10mm) max. 4m (13.12ft)
Temperature
(A) Temperature :(-40 to +392°F (-40 to +200°C))
(B) Temperature : (-4 to +392°F (-20 to +200°C))
(C) Temperature : Standard / -50 to +150°C (-58 to +302°F)
Process Connection
(A) Process Connection : 3/4" NPT
(B) Process Connection : 1" NPT
(C) Process Connection : 1 1/2" NPT
(D) Process Connection : 2" 150lb RF ASME B16.5
(E) Process Connection : 2" 300lb RF ASME B16.5
Probe Length
(XXX) Probe Length : Probe length in inches($1.50 per inch)
Output
(01) Output : 2-wire / 4 to 20mA passive HART®
(02) Output : 2 x 2-wire / 4 to 20mA passive HART® + 4 to 20mA passive
(03) Output : 2-wire + 4-wire / 4 to 20mA passive HART® + switch output - relay (48VDC/6A ; 24 VDC /6A)
Orientation
(A) Orientation: Horizontal
(B) Orientation : Vertical
Option
(DGC) Option : Dynamic Gas-phase Compensation (DGC) (C.F.)
(CC) Option : Calibration Certificate (C.F.)
(WP) Option : Weather Protection
(Tag) Option : Stainless Steel Tag Plate
Tek-Flex 4100A Explosion Proof Guided Wave Radar
Model No:
Tek-Flex 4100A
Unit List Price:
Consult Factory
Description:
Calibrated Range:
Tag No:
Quantity can be added at time of final quotation.
Note :
Standard Model
Back
Reset
Feature in Stock
1-2 Week Lead Time
Copyright © 2018
Tek-Trol LLC
, All Rights Reserved |
Sitemap
|
Privacy Policy
|
Terms & Conditions