Flush Ceramic Submersible Level Transmitter
TEK-SUB 4800F FLUSH CERAMIC SUBMERSIBLE LEVEL TRANSMITTER
The Tek-Sub 4800F Flush Ceramic Submersible Level Transmitter features a ceramic capacitive pressure sensor housed in durable stainless steel. Designed for accuracy and versatility, it suits a wide range of level measurement tasks. Its waterproof cable is securely sealed with a vented tube, allowing for long-term use in water or other liquids. The transmitter’s integrated design and standardized output signal ensure straight – forward installation and reliable automation.
Features
Specification
Document
Model Chart
Features
- Measuring ranges from 5 to 20 Psi (3.5 to 14 mH2O)
- IP68, Submersible level measurement
- HART communication (setting of offset, span and damping)
- Accuracy: ± 0.25% F.S
- Calibrated and temperature compensated
- Ceramic pressure sensor
- Output 4.20mA+HART, RS 485, 0.5-4.5 VDC
Specification
| Pressure Range | 5 to 20 Psi (3.5 to 14 mH2O) | ||
| Pressure Type | Gauge (vented) | ||
| Over Pressure | 500% F.S. | ||
| Accuracy | ±0.25 % F.S. | ||
| Temperature Coeffitient-Zero | ±0.75 F.S. (typ.), ±1.5 F.S. (Max) Over Compensated | ||
| Temperature Coeffitient-Span | ±0.75 F.S. (typ.), ±1.5 F.S. (Max) Over Compensated | ||
| Long Term Stability | 0.2% FS | ||
| Output Signal | 4-20 mA + HART, RS 485, 0.5-4.5 VDC | ||
| Power Supply (Vs) | 12 to 36 VDC | ||
| Loop Resistance (RL) | RL < (Vs – 12) / 0.02A | ||
| Operating Temperature | 114°F to 140°F (-10°C to 60°C) | ||
| Vibration | 10g force (20 to 2000Hz) | ||
| Shock | 100g force (10ms) | ||
| Cycles | 10×105 cycles | ||
| Insulation Resistance | 100 MΩ 100VDC | ||
| Compensated Temperature Range | 32°F to 140°F (0°C to 60°C) | ||
| Housing | 316 Stainless Steel | ||
| Cable | PUR, PE, PTFE | ||
| Diaphragm | Ceramic | ||
| Seal Ring | Viton | ||
| Weight | ~1.32 lbs (600 g) [without cable] |
Document
Model Chart
