Range
Range: The span of rates within which the sensing element of a given switch can be set to actuate an electric switch.
Range: The span of rates within which the sensing element of a given switch can be set to actuate an electric switch.
Rated Pressure: The maximum pressure that the actuating components of the switch in contact with the media can withstand continuously and/or repeatedly without risk of permanent damage.
In business, a system is described as real-time if it will operate in a deterministic manner, i.e., it will respond to input within a defined time limit. For example, safety-relevant systems must always respond within pre-determined time limits. Many automation applications are also real-time, as unpredictable response times and reaction delays would effectively destabilize the process. To ensure a system is real-time, it must fulfill stringent demands with both hardware and software design.
Relative Humidity: The ratio of the quantity of water vapor in the air to the quantity of water vapor required for saturation at the same temperature.
Repeatability: The closeness of agreement between the results of successive measurements of the same measured, carried out under the same conditions of measurement, i.e.: by the same measurement procedure; by the same observer; with the same measuring instruments, used under the same conditions; at relatively short intervals of time. [IEC 60050-300]
A wireless device installed to increase the communications distance by repeating wireless communications.
Repetitive Accuracy: The ability of a switch to operate repetitively at its set point under consistent conditions.
The time required for a timer to return to the state it was in before the starting state after the voltage of the operation circuits is shut off during or after an operation.
Response Time: The time it takes an element to respond to a change in the value of the measured variable or to produce a change in the output signal.
Ring motor also called wrap-around motor, a ring motor is a very large synchronous motor. The poles of the motor are directly flanged on the driven equipment.
Rotameter: A variable area flowmeter consisting of a tapered tube and afloat.
RS-232: (Recommended Standard 232) is a standard for serial binary data signals connecting between a DTE (Data Terminal Equipment) and a DCE (Data Circuit-terminating Equipment).
[rt_retina_image img_1x="3986" img="3985" class="sidepanel-logo" img_align="" img_bottom_margin="30px" link="" link_target="" link_title=""]
Etiam magna arcu, ullamcorper ut pulvinar et, ornare sit amet ligula. Aliquam vitae bibendum lorem. Cras id dui lectus. Pellentesque nec felis tristique urna lacinia sollicitudin ac ac ex. Maecenas mattis faucibus condimentum. Curabitur imperdiet felis at est posuere bibendum. Sed quis nulla tellus.
63739 street lorem ipsum City, Country
+12 (0) 345 678 9