Tek-Clamp 1200A Ultrasonic Clamp On Flow Meter is designed to measure the fluid velocity of liquid in a full or closed pipe. It is a measurement system which is both easy to install and use. The Tek-Clamp 1200A operates according to the difference in the Transit Time of Flight measured and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next. Flow in the same direction takes less time to travel to the second transducer than flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity. The Tek-Clamp 1200A can be used for metallic, plastic, and rubber tubes.
Tek-Clamp 1200A-100F1 | Tek-Clamp 1200A-100M | Tek-Clamp 1200A-100H | Tek-Clamp 1200A-100EXP | |
---|---|---|---|---|
Accuracy | Better than 1% accuracy | Better than ±1% accuracy | Better than ±1% accuracy | Better than ±1% accuracy |
LCD Display | 2×20 LCD Display | 2 x 20 LCD Display | 4×16 LCD Display | 2 x 20 LCD Display |
Size | Pipe diameters from ½” to 200″ | Pipe diameters from ½” to 200″ | Pipe diameters from ½” to 200″ | Pipe diameters from ½” to 200″ |
Protection Category | IP65 | IP57 | Clamp-on IP65 sensors | IP65: Class I Div II |
Output Signal | Modbus RS485, 4-20 mA, and Pulse | Modbus RS485, 4-20 mA, and Pulse | None | Modbus RS485, 4-20 mA, and Pulse |
Power Supply | 85-264VAC or 24VDC power supply | 8-36VDC | 90-230 VAC power supply, Ni-MH battery operation for over 12 hours | 8-36VDC |
Keypad | 4 × 4 key tactile-feedback membrane keypad | 4 key tactile-feedback membrane keypad | – | 4 key tactile-feedback membrane keypad |
Service | Compatible Liquids | |||
Parameters | Specifications | |||
Main Unit | Accuracy | ±1% of Reading | ||
Velocity | ±0.03 to ±100 ft/s (±0.01 to ±30m/s) | |||
Repeatability | 0.2% | |||
Measurement Period | 0.5 Seconds | |||
Measurement Principle | Transit-time measurement principle | |||
Display | LCD with backlight. 2 x 20 letters | |||
Output | 100F1 | Modbus RS485, 4-20 mA, Pulse | ||
100M | Modbus RS485, 4-20 mA, Pulse | |||
100EXP | Modbus RS485, 4-20 mA, Pulse | |||
100H | None | |||
Input | Two three wire system PT100 platinum resistor input loop. For BTV process monitoring | |||
Other Functions | Automatically stores the memory of the positive, negative, net totalizer flow rate and heat quantity of the last 512 days, 128 months, 10 years | |||
Power | 100F1 | 85 to 264VAC or 8 to 36VDC | ||
100M | 8 to 36VDC | |||
100EXP | 8 to 36VDC | |||
100H | Rechargeable nickel metal hydride battery | |||
Power Consumption | Less than 1.5W | |||
Environment Temperature | -22 °F to 176 °F (-30 °C to 80 °C) | |||
Environment Humidity | 85% RH | |||
Protection Class | IP65 (Tek-Clamp 1200A-100F1) IP65; Class I Div II (Tek-Clamp 1200A-100EXP) IP57 (Tek-Clamp 1200A-100M and 1200A-100H) | |||
Transducers | Clamp-On | S2-type: for pipe size ½” to 4” M2-type: for pipe size 2” to 28” HS-type: for pipe size ½” to 4” HM-type: for pipe size 2” to 28” 1200A-L2: 12” to 200” 1200A-IM: 3” to 7” 1200A-IL: 3” to 12” | ||
Protection Class | IP68, can work in water with depths less than 10’ (3m) | |||
Process Temperature |
-40 °F to 320 °F (-40 °C to 160 °C) | |||
Pipe | Pipe Material | All metals, most plastics, fiberglass, etc. | ||
Pipe Size | ½” to 28” (15mm to 700mm) | |||
Pipe Straight Run | More than 10D for upstream, more than 5D for downstream, , where D is pipe diameter. |
[rt_retina_image img_1x="3986" img="3985" class="sidepanel-logo" img_align="" img_bottom_margin="30px" link="" link_target="" link_title=""]
Etiam magna arcu, ullamcorper ut pulvinar et, ornare sit amet ligula. Aliquam vitae bibendum lorem. Cras id dui lectus. Pellentesque nec felis tristique urna lacinia sollicitudin ac ac ex. Maecenas mattis faucibus condimentum. Curabitur imperdiet felis at est posuere bibendum. Sed quis nulla tellus.
63739 street lorem ipsum City, Country
+12 (0) 345 678 9
info@company.com