All posts by: the_admin

by in Level Measurement

Reliable Measurement with Radar Level

Reliable measurement with Tek-Wave 4300C Radar Level Transmitters! 26GHz high-frequency radar measures up to 90 feet and is designed for continuous, non-contact level measurement. It can be used for complex measurement conditions such as high foam, solid, etc.Using two-wire 26Ghz, the Tek-Wave 4300C utilizes a pulsed echo to optimize radar signal strength hence produces more robust and reliable measurement. Small-size antennas deliver accurate measurements and further optimize itself with the new microprocessor. Tek-Wave 4300C is not affected by dust and foam, along with atmospheric changes (i.e., temperature, pressure, and water vapour).Applications: Storage and buffer tanks Blenders and mixers Open basins. Stilling wells and chamber installations Bulk solids and corrosive Liquids Chemical measurement Petrochemical Power Plants Pharmaceuticals Water and Wastewater Pump shafts Canal systems

by in Differential Pressure

Tek-DP 1640A Venturi Tube Meter

We have launched our brand new Tek-DP 1640A Venturi Tube Meter and our master plan is another step to enhance your knowledge through our digital launch package listed below. Applications Water and sewage plants. Slurry flows in mining, chemical plants. Power Generation. Hydrocarbon, Liquid & Gas Processes. LNG Trains. High Accuracy Custody Transfer, Fiscal and Allocation Flow Metering. Compressor Stations. Cryogenics. Wet Gas Flows and Steam Applications. Specifications For normal liquids Material: All standard materials available Venturi Tube Sizes: 1″ to 48″, Custom size available on order, Flanged, Socket Welded, Butt Welded Valves Operating Position: Vertical, Horizontal (any orientations for liquids only) For wet natural gas Material: All standard materials available Venturi Tube Sizes: 1″ to 48″, Custom size available on order , Flange, Weld in, Insertion type Operating Position: Vertical, Horizontal, Hydrocarbon Wet Gases, Steam, (other orientations available) …and moreVenturi Tube Meter Differential Pressure flow meter designed for the measurement of low viscosity single-phase liquids and gases. LEARN MORE

by in Level Measurement

Radar Level for Reliable Measurement

Reliable measurement with Tek-Wave 4300C Radar Level Transmitters! 26GHz high-frequency radar measures up to 90 feet and is designed for continuous, non-contact level measurement. It can be used for complex measurement conditions such as high foam, solid, etc.Using two-wire 26Ghz, the Tek-Wave 4300C utilizes a pulsed echo to optimize radar signal strength hence produces more robust and reliable measurement. Small-size antennas deliver accurate measurements and further optimize itself with the new microprocessor. Tek-Wave 4300C is not affected by dust and foam, along with atmospheric changes (i.e., temperature, pressure, and water vapour).Benefits Accuracy: ±3mm. Measuring Range: 90ft (30m). Integral Display. Horn Antenna. Works well with dust, foam and changes in water vapor including temperature and pressure in the atmosphere. Two Wire 4-20mA with HART (optional Modbus). LCD Display. Direct Switch Technology increases sensitivity, high reliability, and long measurement ranges. East to install as small size antenna. Maintenance-free measurement. Not affected by corrosion, foam and changes in water vapor including temperature and pressure in the atmosphere. Small Beam angle and energy concentrated. Enhance the echo ability and avoid interference. Smaller measurement blind area. High signal-to-noise ratio. High frequency is the best choice for measuring solid and low dielectric constant medium.

by in Solutions

Advanced Steam Quality Metering Technology Applications

CoVor meter can be used for all types of industrial uses: Pharmaceuticals Brewing Food processing and more. Oil and gas applications are also a strong market that the meter is available for,down hole steam injection and wet gas applications. CoVor Technology for Steam Quality Metering System at Food Plant The Steam Quality system figure is a very recent installation at a food manufacturing plant. Control of the manufacturing process was updated and improved by using the CoVor meter system. Steam quality was monitored at a higher accuracy, which Improved the end user’s production, with fewer failures in their foodproduction lines and improved packaging processes. Clean in place sterilization equipment can also be monitored more comprehensively since the steam quality can be determined more accurately, offering better management of the process! Tek-Trol also offers a comprehensive range of primary and secondary transmitters along with state-of-the-art DP flow monitoring and validation systems (plant conditioned maintenance), popularly known as the Tek-DPro system.

    [rt_retina_image img_1x="3986" img="3985" class="sidepanel-logo" img_align="" img_bottom_margin="30px" link="" link_target="" link_title=""]

    Etiam magna arcu, ullamcorper ut pulvinar et, ornare sit amet ligula. Aliquam vitae bibendum lorem. Cras id dui lectus. Pellentesque nec felis tristique urna lacinia sollicitudin ac ac ex. Maecenas mattis faucibus condimentum. Curabitur imperdiet felis at est posuere bibendum. Sed quis nulla tellus.

    ADDRESS

    63739 street lorem ipsum City, Country

    PHONE

    +12 (0) 345 678 9

    EMAIL

    [email protected]

    [button button_text="PURCHASE" button_style="style-1" font="heading-font" button_size="hero" button_link="#" link_open="" button_icon="icon-right-thin" href_title="PURCHASE"]