All posts by: the_admin

  1. Home
  2. Author: the_admin
April 16, 2020
by in Flow Measurement

Pulp and Paper Production!

Tek-Trol 1400A Electromagnetic Flow Meters used to measure starch water at a Paper Plant in upstate New York. In paper production, it is crucial to measure various additives to ensure product quality. In a Paper Mill, liquid additives: such as powdered products diluted in water, dyes, bleaches, and liquids with low conductivity and / or high viscosity are used in various processes. The Tek-Trol 1400A series of Magnetic Flow Meters offer an economical choice in measuring Starch Water for you in a Paper Mill. Starch additives are used in recycled papers to increase the strength of the cardboard. The starch arrives at the mill in powder form with various particle sizes along with moisture content. This start is then stored in silos. Using a variable speed Auger, the starch is then mixed with water in a small tank and then pumped into the piping system for transportation to the cooking system. During this process, it is mandatory to maintain the correct water to starch balance as its a critical function within this process.

Continue reading
April 13, 2020
by in Flow Measurement

Oil and Gas Separators!

Separators reside on onshore well pads and offshore platforms and can be horizontal, vertical, or a sphere. They’re used in upstream oil and gas applications for periodic well testing (as a test separator) or continuous production measurement (as a production separator), and can function in either two-phase or three-phase. The separator has one goal: separate the oil from the gas and water. But, if you choose the best flow measurement for your separator, you can really make it work to meet not only this goal but also deliver much more insight into your operation. Gas. In order for a separator to function, it requires a steady, maintained level of pressure in order to push the fluids out of the separator and into a tank. If the pressure’s too high, you can get gas entrained in the oil where it will simply vent off from the tank resulting in higher emissions and lost product. If the pressure’s too low, you can lose the more valuable, lighter, or intermediate gases (called natural gas liquids or NGLs) as they get pulled out into the natural gas. NGLs have a higher BTU content, and you’ll want to keep these valuable BTUs in liquid form. In some applications, the Gas Outflow serves as a Custody transfer point. If so, you’ll want to know how much gas each well is producing, and there are several flow measurement technologies that can help. The Tek-Cor 1100A Coriolis offers excellent accuracy for any custody transfer point is provided and […]

Continue reading
March 24, 2020
by in Level Measurement

Tek-Sub 4800 Series Submersible Level Transmitters Features

Tek-Sub 4800 Submersible Level Transmitters are designed to measure the liquid and slurries Level, along with monitoring the level of fluids. These devices have high precise piezoresistive sensor, stainless steel body, and waterproof cable, which makes them suitable for long term ideal service. Easy to install, clean, and almost no maintenance. Tek-Sub 4800A uses a high-quality ceramic pressure sensor packaged with PTFE housing that gives corrosion resistance in fluids. Tek-Sub 4800B is designed to measure the liquid and slurries Level, including a high precise piezoresistive sensor that offers accurate and reliable level measurement in numerous applications. Tek-Sub 4800C Borehole is 19 mm diameter, perfect for narrow conduit installation. The piezoresistive sensor is placed in a slim outer body that fits into boreholes, wells, and slender pipes. Tek-Sub 4800D has clog-free silicon piezoresistive sensor regulating liquid level without being affected by debris, manufactured for precise real-time level measurement with several standard outputs. Features Temperature-compensated. Completely sealed, stainless steel. Highly durable with low maintenance. Factory calibrated with easy installation. Measuring Pressure range: Tek-SUB 4800A: 3 psig to 15 psig (2 mH2O to 10.5 mH2O). Tek-SUB 4800B and Tek-SUB 4800D: 5 psi to 20 psi (3.5 mH2O to 14 mH2O), Optional ranges available. Tek-SUB 4800C: 10 psi to 50 psi (7 mH2O to 35 mH2O), Optional ranges available• Accuracy: Tek-SUB 4800B: ±0.25% FS Tek-SUB 4800A, Tek-SUB 4800C & Tek-SUB 4800D: ±0.5% FS.

Continue reading
March 24, 2020
by in Level Measurement

Tek-sub 4800 Series Submersible Level Transmitters Applications

Tek-Sub 4800 Series of Transmitters are designed for high performance and precise level measurements. Piezoresistive sensor, stainless steel body, and waterproof cabling make these Submersible Level Transmitters suitable for long term accurate service. This high-performance real-time level measurement device is available with multiple output signal options, several level ranges, custom cable lengths, and materials. Water and Wastewater: Water level measurement in wells, borewells, ponds, reservoirs, weirs, and dams including ground water monitoring for muddy liquid and thick slurries level, etc Chemicals: Level measurement for Sulfuric acid, Fertilizer, brine, HCL, sodium hypochlorite, etc

Continue reading

    [rt_retina_image img_1x="3986" img="3985" class="sidepanel-logo" img_align="" img_bottom_margin="30px" link="" link_target="" link_title=""]

    Etiam magna arcu, ullamcorper ut pulvinar et, ornare sit amet ligula. Aliquam vitae bibendum lorem. Cras id dui lectus. Pellentesque nec felis tristique urna lacinia sollicitudin ac ac ex. Maecenas mattis faucibus condimentum. Curabitur imperdiet felis at est posuere bibendum. Sed quis nulla tellus.

    ADDRESS

    63739 street lorem ipsum City, Country

    PHONE

    +12 (0) 345 678 9

    EMAIL

    [email protected]

    [button button_text="PURCHASE" button_style="style-1" font="heading-font" button_size="hero" button_link="#" link_open="" button_icon="icon-right-thin" href_title="PURCHASE"]