Programmable Two-Wire TDR Level Transmitter With HART And Display
TEK-FLEX 4100C SERIES PROGRAMMABLE TWO-WIRE TDR LEVEL TRANSMITTER WITH HART AND DISPLAY
The Tek-Flex 4100C Programmable Two-Wire TDR Level Transmitter With Hart & Display liquid measurement in an environment where there are volatile matters or vapors; able to adapt to environment with complex process and conditions.
High frequency microwave pulses travels along the detecting component (steel rope or rod) and reflects when reaching the product surface. The time from emission to reception is proportional to the distance between the surface and the reference plane on the instrument.
Features
Specifications
Documents
Drawings
Model Chart
Features
- 2 wire-loop-powered level meter with HART
- Measuring range up to 60′
- Local display and push button programming
- Probes and process connections are made of stainless steel
- For process temperature up to 302˚F and pressure up to 580 psig
- Not affected foam, vapor or mist
Specifications
| Application | Compatible Liquids, Bulk Solids |
| Wetted Material | 316 L SS and Kalrez |
| Measuring Principle | TDR (Time Domain Reflectometry) |
| Ranges | Up to 60 ft |
| Accuracy | ± 0.4″ |
| Process Pressure | -14.5 to 580 psi |
| Process Temperature | -40 to 302°F (-40 to 150°C) |
| Process Connection | 1.5″ Male NPT |
| Protection Category | NEMA 4X |
| Housing | Epoxy Coated Aluminum |
| Cable Entry | Two ½ NPT |
| Power Supply | 16 to 36 VDC |
| Power Consumption | 22.5 mA |
| Damping | 0 to 40 seconds |
| Output Signal | 4 to 20 mA with HART (2 wire) |
| Minimum Dielectric Constant | 0.3 |
| User Interface Options | LCD Display |
Documents
Drawings
Model Chart
